The crossbeam of the slitting guide is mainly used to support and fix the guide device, so the crossbeam not only needs sufficient strength, but also requires the crossbeam to be firmly fixed on the rolling mill frame. So how to fix it, what are the common methods? Let's take a brief look below.
There are generally two commonly used methods to fix the crossbeam:
One is to press the wedge into the groove on the inner side of the frame column from the side or from the top to fix the crossbeam of the slitting guide.
The other is to place the bolt in the groove on the front side of the frame column and fix the crossbeam by tightening the bolt.
These are two commonly used methods. It cannot be said which one is better. As long as it is suitable, it is good. Everyone can analyze according to their actual situation and finally choose the appropriate solution.
Suzhou AET Machinery Co., Ltd. is a manufacturer of custom-designed guides, slitting guides, torsion exit guides, round steel guides, high-wire guides, guide rollers, slitting rolling, slitting debugging, and slitting hole design. Our company was established in 2008 and is located in Zhangjiagang City, Jiangsu Province. Our company is responsible for all hole design, guide design and manufacturing, commissioning and guidance of the steel rolling sample production line. The commissioning and production are fast, and the indicators are leading: the average daily output of 12 rebar five-cut is more than 4,800 tons per month; the daily operation rate is more than 94%; the annual output of the line is more than 1.68 million tons! For more information, please visit the website: http://www.aetjx.cn/